Brother DCP-7065DN Driver

By | February 6, 2018

Brother DCP-7065DN Driver for Mac, Windows, and Wireless Setup – Brother DCP-7065DN is a monochrome laser printer with multifunction capability. Brother DCP-7065DN has printing, copying, and scanning capabilities. This printer is suitable for use at home or home office. Having a warm-up time speed of 27 sec from power ON and less than 7 sec. from sleep mode, Brother DCP-7065DN has printing and copying speeds of up to 27 papers per minute.

Brother DCP-7065DN Driver

Brother DCP-7065DN

The scan feature on Brother DCP-7065DN can send your scan result directly to email. DCP-7065DN features 2 on 1, 4 on 1, and ID card copy with this feature you can minimize the amount of paper you use by making 2 sheets of paper into 1 or 4 sheets of paper into 1 sheet. Id card copy which will allow you to do your copy id card without having to set your ID card position. The featured on the DCP-7065DN Brother printer is auto-duplex where you can get 2 sides of paper print results automatically.

For the resolution result, Brother DCP-7065DN has a pretty good resolution. For the results of the printer, the maximum resolution produced is 2400×600 dpi. With the resolution results are enough to produce a clear monochrome image. Next is the resolution of the copying result is 600×600 dpi with this resolution the result of the text will be clear but not in the picture result. DCP-7065DN can generate a scaled resolution of 600×2400 dpi and an interpolated resolution of 19200×19200 dpi.

Brother DCP-7065DN’s capacity is large enough, it can use up to 1 sheet for the feeder, 100 sheets in the bypass tray, 250 sheets in the input tray, and 35 sheets in the output tray. The minimum paperweight size that can be accommodated by DCP-7065DN is 60/64 gr while the maximum limit of the paperweight is 105 g, 163 g, and 90 g. Brother DCP-7065DN has a toner capacity of up to 700 sheets.

Recommended Printer: Brother DCP-8110DN Driver Download

Brother DCP-7065DN Wireless Setup

A. Factory Reset

  1. First, hit the menu button on your machine.
  2. Then, use the bottom-up button to find the network menu. And then, hit ok.
  3. After that, choose factory reset, and then hit ok.
  4. Next, select number 1 (If your printer has a fax button. Otherwise, follow the instruction on the screen).
  5. Your printer is going to reset the network automatically.
  6. Then, you should do a wizard setup to activate the wireless.
  7. Continue by pressing the menu button by using the bottom-up button to find “network” and ok.
  8. Choose “WLAN”. Then, press ok.
  9. Select “setup wizard”, and then wait for a moment. Your machine is searching for the SSID. Once this process is done, hit back.
  10. After completing the steps, the Wi-Fi icon will appear at the top of the screen.

B. Setting on Computer

  1. Insert the CD driver.
  2. Select the language.
  3. Next, choose the “initial installation” menu
  4. Then, select “install MFL-Pro Suite”
  5. Select yes and wait for a moment.
  6. After that, continue by choosing a wireless network connection. Then, choose next.
  7. Check all the options and choose next.
  8. If your Wi-Fi has detected the printer, choose the printer and select next until a pop-up message shows and instructs you to restart your device.
  9. On the other hand, if your Wi-Fi does not detect it, choose the second option that identifies your machine by address.
  10. Fill in your IP address in your computer on the blank column.
  11. Here, you can check the IP address in your computer: choose menu > network> Wlan> TCP/IP> IP address.
  12. If you have completed the process, your computer will process it immediately until you get a message “Brother Registration”. After that, choose next and restart your computer.

C. Setting on Wireless Network Connection

  1. On your PC/ network, search for Wireless Network Connection
  2. After that, choose “SETUP” in the option. Choose the wireless network and select Connect
  3. Next, choose “Connect Anyway” and wait for a moment until you see that your wireless is connected.

Brother DCP-7065DN Wifi Setup Guideline

  1. You have to check that your printer is on.
  2. Go to the Network menu selection > Reset Network > Press no.1 (to restart the printer)
  3. After that, the machine will enter the Default Printer mode
  4. You have to choose Network > Setup Wizard so you can continue the process.
  5. Then, choose SSID > and then choose NEW SSID (The machine will ask you to create a username and password). After that, press OK
  6. Next, choose AD-HOC and connect it to the SSID you have created (The printer will print the printer status automatically. After that, wait for 1 to 5 minutes so the printer will connect via scan IP address)
  7. Your Wi-Fi setup installation is complete. After that, try to connect your laptop or computer to the SSID printer.

How to Driver Installation:

  • Use a USB cable to connect the computer and printer.
  • Double-click on the file that you downloaded.
  • After that, open the installed file & click run
  • Follow the on-screen installation instructions.”

Note :
This file applies to numerous Brother products and may be compatible with operating systems that your model is not.

How to uninstall:

  • Open the Control Panel,
  • Click uninstall the program,
  • Double-click on the drivers that will Uninstall, then click yes/ok,
  • Follow until the uninstall wizard is complete and click Finish.

Brother DCP-7065DN Driver and Software Download

Operating System Download
Brother DCP-7065DN Driver Windows 64-Bit
Windows 11, Windows 10 64-bit, Windows 8.1 64-bit, Windows 8 64-bit, Windows 7 64-bit, Windows XP 64-bit, Windows Vista 64-bit
    Download
Brother DCP-7065DN Driver Windows 32-Bit
Windows 11, Windows 10 32-bit, Windows 8.1 32-bit, Windows 8 32-bit, Windows 7 32-bit, Windows XP 32-bit, Windows Vista 32-bit
    Download
Brother DCP-7065DN Driver Mac
Macintosh macOS 13.x, macOS 12.x, macOS 11.x, macOS 10.15.x, macOS 10.14.x, macOS 10.13.x, macOS 10.12.x, Mac OS X 10.11.x, Mac OS X 10.10.x.
    Download
Brother DCP-7065DN Scanner Driver Mac
Macintosh macOS 13.x, macOS 12.x, macOS 11.x, macOS 10.15.x, macOS 10.14.x, macOS 10.13.x, macOS 10.12.x, Mac OS X 10.11.x, Mac OS X 10.10.x.
    Download
Brother DCP-7065DN Printer Driver Download Brother Official Site