Brother MFC-J6930DW Driver and Software

By | May 30, 2017
0 Comment

Brother MFC-J6930DW Driver, Software, Wireless Setup – The Brother MFC-J6930DW is the multifunction printer that offers the fast performance and lower cost of printing. This inkjet technology printer is for color and monochrome printer. The maximum size of paper compatible to this is tabloid (11 x 17 inches). Then, this device also can be used as copier, scanner, and also fax machine. This is ideal for handling the mid-sized workgroup or small office printing needs.

Brother MFC-J6930DW Driver

Brother MFC-J6930DW

Brother MFC-J6930DW is equipped by easy paper handling with the capacity up to 500 sheets. For the automatic document feeder, the capacity is 50 sheets and the multipurpose tray is up to 100 sheets. The speed print of this printer is fast enough where for black page it is up to 35 ppm while the color one is up to 27 ppm. The maximum resolution is 1200 x 4800 dpi. Then, the auto duplex is also available where you can print, copy, and scan for two sides of sheet of paper.

Then, as copier, you can copy the document both in monochrome and color. The based speed of the copier is 12 cpm black and 9 cpm for color. The first copy speed is 6 seconds from its ready mode. As scanner, it has capability to scan both black and color scanning with the maximum resolution 600 x 600 dpi. Then, this printer also serves as the standalone faxing machine with the modem speed is 33,600bps (Super G3).

The connectivity features of this Brother MFC-J6930DW are quite richer. Wired and wireless connectivity are available. To and more flexibility when printing, copying, scanning, or faxing, the Wi-Fi feature can connect the printer with PC or mobile device.  Thus, it is compatible with some software like AirPrint, Google Cloud Print, iPrint&Scan, NFC, Brother, etc.

Similar with the Brother printer in other series, the Brother MFC-J6930DW also uses INKvestement cartridge system with super high yield ink. There are four base cartridges that offers high capacity –black, cyan, magenta, and yellow. When the inks run out, the replacement cost is quite inexpensive. Therefore, this printer can help you in producing the good quality and lower cost printing at once.

Brother MFC-J6930DW Wireless Setup

A. Factory Reset

  1. First, hit the menu button on your machine.
  2. Then, use the bottom up button to find network menu. And then, hit ok.
  3. After that, choose factory reset, and then hit ok.
  4. Next, select number 1 (If your printer has fax button. Otherwise, follow the instruction on the screen).
  5. Your printer is going to reset the network automatically.
  6. Then, you should do wizard setup to activate the wireless.
  7. Continue by pressing the menu button by using the bottom-up button to find “network” and ok.
  8. Choose “WLAN”. Then, press ok.
  9. Select “setup wizard”, and then wait for a moment. Your machine is searching for the SSID. Once this process is done, hit back.
  10. After completing the steps, the Wi-Fi icon will appear at the top of the screen.

B. Setting on Computer

  1. Insert the CD driver.
  2. Select the language.
  3. Next, choose the “initial installation” menu
  4. Then, select “install MFL-Pro Suite”
  5. Select yes and wait for a moment.
  6. After that, continue by choosing a wireless network connection. Then, choose next.
  7. Check all the options and choose next.
  8. If your Wi-Fi has detected the printer, choose the printer and select next until a pop-up message shows and instructs you to restart your device.
  9. On the other hands, if your Wi-Fi does not detect it, choose the second option that identifies your machine by address.
  10. Fill your IP address in your computer on the blank column.
  11. Here, you can check the IP address in your computer: choose menu > network> Wlan> TCP/IP> IP address.
  12. If you have completed the process, your computer will process it immediately until you get a message “Brother Registration”. After that, choose next and restart your computer.

C. Setting on Wireless Network Connection

  1. On your PC/ network, search for Wireless Network Connection
  2. After that, choose “SETUP” in the option. Choose the wireless network and select Connect
  3. Next, choose “Connect Anyway” and wait for a moment until you see that your wireless is connected.

Brother MFC-J6930DW Wifi Setup Guideline

  1. You have to check that your printer is on.
  2. Go to the Network menu selection > Reset Network > Press no.1 (to restart the printer)
  3. After that, the machine will enter the Default Printer mode
  4. You have to choose Network > Setup Wizard so you can continue the process.
  5. Then, choose SSID > and then choose NEW SSID (The machine will ask you to create a username and password). After that, press OK
  6. Next, choose AD-HOC and connect it to the SSID you have created (The printer will print the printer status automatically. After that, wait for 1 to 5 minutes so the printer will connect via scan IP address)
  7. Your Wi-Fi setup installation is complete. After that, try to connect your laptop or computer to the SSID printer.

Brother MFC-J6930DW Installation Software For Windows 

  1. To start, you must download the Brother MFC-J6930DW driver. After that, select the system operation of your computer.
  2. Next, double-click the file you have downloaded.
  3. After that, choose Unzip
  4. Open that folder
  5. Then, double-click to the D_SETUP.exe. The installation is ready to start.
  6. You are going to see the instructions on the screen. Follow the steps to finish the installation.
  7. Once the installation is complete, restart your computer. You can test your printer.

Brother MFC-J6930DW Installation Software For Mac

  1. You must download the Brother MFC-J6930DW driver. After that, choose the operating system for your computer.
  2. Next, double-click to the “xxxxxxxx.dmg” you have downloaded.
  3. Then, double click to the “xxxxxxxx.pkg. This is the installer package.
  4. You have to follow the instructions so you can complete the installation.
  5. Once you finished the installation, please restart the computer. After that, you can test your printer.

Brother MFC-J6930DW Driver and Software Download

System Operation Download
Brother MFC-J6930DW Driver & Software
Windows 10, 8.1, 8, 7, Vista, XP		 Download
Brother MFC-J6930DW Driver & Software
Mac OS X 10.11, OS X 10.10, OS X 10.9, OS X 10.8, OS X 10.7		 Download
Brother MFC-J6930DW Driver & Software
macOS (10.12), OS X (10.11), OS X (10.10), OS X (10.9)		 Download
Brother MFC-J6930DW Driver & Software
Linux (rpm), Linux (Deb)		 Download
Brother MFC-J6930DW iPrint&Scan Download
Brother MFC-J6930DW Driver Download From Brother Official Click Here